Arama butonu
Bu konudaki kullanıcılar: 1 misafir
1
Cevap
621
Tıklama
0
Öne Çıkarma
RDM6300 Arduino Door Control System DIY in $29.5
S
9 yıl
Çavuş
Konu Sahibi

RDM6300 is a 125KHz card reader mini-module designed for reading code from 125KHz RFID card. It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. In this blog, we will utilize its identification recognize function to do a door control system.

Components:

RDM6300: $5.5https://www.itead.cc/rdm6300.html
SG90 Servo: $7 https://www.itead.cc/tower-pro-airplane-9g-sg-90-mini-servo.html
Iteaduino Nano: $5.5https://www.itead.cc/iteaduino-nano.html
Magnet Sensor: $1.5https://www.itead.cc/prototyping/electronic-brick/sensor-brick/electronic-brick-magnetic-sensor-switch-brick.html

< Resime gitmek için tıklayın >

1.Upload demo to Iteaduino Nano

Download the demo http://blog.iteadstudio.com/wp-content/uploads/2014/11/rdm6300_code1.zip, and upload it to your Iteaduino Nano or UNO. This demo is without any library supporting.

2.Assembly

Please assemble the modules according to the following picture.

Iteaduino Nano

< Resime gitmek için tıklayın >

Iteaduino UNO

< Resime gitmek için tıklayın >

3.Read your ID number

Place your card on the coil of RDM6300, then you can open the Arduino IDE’s serial monitor to see what the card ID number is.

< Resime gitmek için tıklayın >

Write down the card ID number. You should revise the demo by typing these numbers in it later.

After revising demo and uploading again, you can install them on the back of your home door. Just like the video we show at the beginning, you can DIY a home door control system.

< Resime gitmek için tıklayın >

< Resime gitmek için tıklayın >

< Resime gitmek için tıklayın >

< Resime gitmek için tıklayın >

info via
http://blog.iteadstudio.com/rdm6300-arduino-door-control-system

DH forumlarında vakit geçirmekten keyif alıyor gibisin ancak giriş yapmadığını görüyoruz.

Üye olduğunda özel mesaj gönderebilir, beğendiğin konuları favorilerine ekleyip takibe alabilir ve daha önce gezdiğin konulara hızlıca erişebilirsin.

Üye Ol Şimdi Değil



E
9 yıl
Yarbay

O setteki servo kısa sürede bozulacaktır eğer kendi eviniz için kullanacaksanız metal dişli kaliteli bir servo kullanmanızı tavsiye ederim.



< Bu ileti mobil sürüm kullanılarak atıldı >

DH Mobil uygulaması ile devam edin. Mobil tarayıcınız ile mümkün olanların yanı sıra, birçok yeni ve faydalı özelliğe erişin. Gizle ve güncelleme çıkana kadar tekrar gösterme.