1. sayfa
|
Merhaba, Dynamic disc ten basic diske geri dönüş yapamazsınız, Sistem izin vermez. Yeniden Yapılandırmanız lazım. Yani tüm partionları silip sıfırdan oluşturacaksınız. Kolay gelsin. |
|
Katılıyorum bizim arkadaşın sistemi çöktü dinamik disk olduğu için kurtaramadı. Microsoft şöyle diyo : To change a dynamic disk back to a basic disk (dinamik diski basic diske dönüştürmek) Using the Windows interface (windows kullanacaksın) Back up all volumes on the disk you want to convert from dynamic to basic. (bütün dosyalarını yedekleyeceksin) My Computer e sağ tıkla, manage tıkla Disk Management bölümüne gel Storage Disk Management Right-click the dynamic disk you want to convert to a basic disk, and then click Delete Volume for each volume on the disk. (Çevirmek istediğin diske sağ tıkla sonra sil komutunu ver When all volumes on the disk have been deleted, right-click the disk, and then click Convert To Basic Disk. Note To open Computer Management, click Start, and then click Control Panel. Click Performance and Maintenance, click Administrative Tools, and then double-click Computer Management. You must be logged on as an administrator or a member of the Administrators group in order to complete this procedure. If your computer is connected to a network, network policy settings may also prevent you from completing this procedure. The disk must be empty before you can change it back to a basic disk. If you want to keep your data, back it up or move it to another volume before you convert the disk to a basic disk. Once you change a dynamic disk back to a basic disk, you can create only partitions and logical drives on that disk. Using a command line Back up all volumes on the disk you want to convert from dynamic to basic. For more information about backing up volumes, see Related Topics. Open Command Prompt Type: diskpart At the DISKPART prompt, type: list volume Make note of the volume(s) you want to delete. At the DISKPART prompt, type: select volume=n At the DISKPART prompt, type: delete volume At the DISKPART prompt, type: list disk Make note of the disk number of the disk that you want to convert to a basic disk. At the DISKPART prompt, type: select disk n At the DISKPART prompt, type: convert basic Value Description list volume Displays a list of basic and dynamic volumes on all disks. select volume Selects the specified volume, where n is the volume number, and shifts the focus to it. If no volume is specified, the select command lists the current volume with focus. You can specify the volume by number, drive letter, or mount point path. On a basic disk, selecting a volume also gives the corresponding partition focus. delete volume Deletes the selected volume. You cannot delete the system volume, boot volume, or any volume that contains the active paging file or crash dump (memory dump). list disk Displays a list of disks and information about them, such as their size, amount of available free space, whether the disk is a basic or dynamic disk, and whether the disk uses the master boot record (MBR) or GUID partition table (GPT) partition style. The disk marked with an asterisk (*) has focus. select disk Selects the specified disk, where n is the disk number, and shifts the focus to it. convert basic Converts an empty dynamic disk into a basic disk Note To open command prompt, click Start, point to All Programs, point to Accessories, and then click Command Prompt. You must be logged on as an administrator or a member of the Administrators group in order to complete this procedure. If your computer is connected to a network, network policy settings may also prevent you from completing this procedure. The disk must be empty before you can change it back to a basic disk. If you want to keep your data, back it up or move it to another volume before you convert the disk to a basic disk. Once you change a dynamic disk back to a basic disk, you can create only partitions and logical drives on that disk. For more information about DiskPart, see Related Topics. |
|
Bunu kurtarmanın yolu var benimde bugun başıma geldi 500 gb kurtardım şu yolu izle başlat << sağ tık << Tüm Kullanıcıları aç << Programlar << Yönetimsel Araçlar << Bilgisayar Yönetimi << Disk yönetimi << kullanamadığınız disk << sağ tık << yabancı diskleri al işte bukadar kendi deneyimim ile sorunu çözdüm kolay gelsin |
| yuh hiç bakmadım 2004 konusu ama eminim birilerinin işşine yarar |
benim yaradı:) |
|
1- Temel diske çevireceğiniz dinamik diskinizin içindeki bilgilerinizin yedeğini alın. 2- Başlat\Çalıştır'a CMD yazıp Enter tuşuna basarak komut satırına geçin. 3- DiskPart yazarak enter tuşuna basın. 4- list disk komutu ile sabit disklerinizin listesini alın. Not: Kod içindekiler komut satırı penceresidir Kod: DISKPART> list disk Disk ### Durum Boyut Boş Din Gpt -------- ---------- ------- ------- --- --- Disk 0 Çevrimiçi 37 GB 0 B Disk 1 Çevrimiçi 75 GB 75 GB 5- Ekrana gelen listeden hangi diski çevirecekseniz onun numarasını not alın. (Biz Disk 1'i çevireceğiz) 6- select disk 1 (Burada örnekteki diskin numarasını yazdık. Siz hangi disk ise onun numarasını yazın. Hata yapmayın) Kod: DISKPART> select disk 1 Disk 1 şimdi seçili disk. 6- Burada seçtiğimiz diskin ayrıntılarını görmemiz gerekiyor. Bunun için detail disk komutunu kullanacağız. Kod: DISKPART> detail disk SAMSUNG SP0802N Disk ID: 3EB1AFC7 Türü : IDE Bus : 0 Hedef : 1 LUN ID : 0 Bölüm #### Ltr Etiket Ds Tür Boyut Durum Bilgi ---------- --- ----------- ----- ---------- ------- --------- -------- Birim 0 I Deneme NTFS Basit 75 GB Sağlam Burada bize lazım olacak şey diske atanan letter yani sürücü harfi. Örneğimizde I olarak belirtilmiş. 7- Şimdi select volume komutu ile yukarıdaki bilgilerden aldığımız sürücü harfini kullancağız. Kod: DISKPART> select volume=i 0 bölümü seçili bölüm. 8- Bu volümü silmemiz gerekiyor. Kod: DISKPART> delete volume DiskPart bölümü başarıyla sildi. 9- Temel diske çevireceğimiz diskimizi select komutu ile tekrar seçiyoruz. Kod: DISKPART> select disk 1 Disk 1 şimdi seçili disk. 10- Şimdi son aşamaya geldik. Artık dinamik diskimizi temel diske dönüştürebiliriz. Kod: DISKPART> convert basic DiskPart seçili diski başarıyla temel biçime dönüştürdü. diskpart'tan çıkmak için exit yazıp enter tuşuna basın Komut satırından çıkmak için yine exit yazıp enter tuşuna basın Bundan sonra yapmanız gereken diskinizi bölümlemek ve formatlamak. |
| Yaw bunun daha kolay bir yolu vardı bi türlü bulamadım net'te nerde olduğunu yazmamışım da bir yere, hiç böyle uğraşmıyosunuz formatla felan. Dur bulursam ekliim buraya. |
| Sorunun en kolay çözümü Dynamic Disk Converter Professional 3.0 adlı program,diskdeki bilgileri silmeden 30 saniyede hallediyor.Umarım benim gibi günlerce google dan bir çözüm arayanların işine yarar :) |
1. sayfa
Fdisk yapıp onlarca program, server, vb. zımbırtıların kurulumu ve ayarları ile tekrar uğraşmak istemiyorum.
Bu nedenle veri kaybı olmadan dinamik diski temel diske dönüştürmek ve yeniden partitionlamak için bir yol olup olmadığını merak ettim.
(Partition magic falan demeyin, dinamik diskte hiçbir şekilde işlem yapamıyor, ne windowsta, ne de dos'ta. ayrıca linux partition programları da veri kaybı olmadan bu işi halledemiyor)
Şeytan diyor git 2. bir disk al kurtul bu dertlerden...
DH forumlarında vakit geçirmekten keyif alıyor gibisin ancak giriş yapmadığını görüyoruz.
Üye Ol Şimdi DeğilÜye olduğunda özel mesaj gönderebilir, beğendiğin konuları favorilerine ekleyip takibe alabilir ve daha önce gezdiğin konulara hızlıca erişebilirsin.