Macro

20 yıl (832 mesaj)

Yüzbaşı

Konu Sahibi

Writing a macro in... ACTool!
This short guide will outline a very simple macro "z,r", so don't expect much from it.
I might post more advanced tutorials in the future...

OK, the first thing we always need to do is make the Knight Online Client window become active (so if it's minimised, it'll load up).
This can be achieved via this command:

Code:
SetActiveWindow Knight OnLine Client
The syntax (usage) for the SetActiveWindow function is:
SetActiveWindow {Window Title}

Also, please note that I wrote the window title in its exact case!

Now that you've done that, set your global hotkeys for starting and stopping the macro (Editor -> Preferences -> Global Hotkeys). I prefer the Esc key.

Now we move onto the speed...
For this, we need ObjVar CommandDelay and KeyRate.
It's recommended to keep these commands the same for macros, but if you ~really~ need to change it, do so.

Now we move onto our main part of the macro.

Code:
While 1=1
// Code here...
End
This nifty piece of coding is used to repeat something infinitely (While 1 is equal to 1, which it always is!)

So translated.. this means:
While 1 is equal to 1, which it always is..
Do the following...
Then finish one repeat (End) and begin again until 1 doesn't equal 1 (which will never happen).

The "// Code here..." part is our comment. I'll be putting in lots of comments for the rest of this tutorial.

So seeing as what's inside the While function (can't call it a loop ) is a comment which does absolutely nothing except keeps your code nice and tidy, this won't do anything!

We need to work on the bit inside the While function now...

Code:
While 1=1
Keys z // Press the key z
Keys r | 100 //Press the key r after 100 ms
End
As you can see from my comments, the first bit "Keys z" simply presses the button z! In Knight Online of course, this targets a new enemy. How simple is that?!
But wait, this function can get a little more advanced (not much ) by having an AUTOMATIC delay between keys!

"Keys r | 100" simply means press r after 100 ms (milliseconds). Unless it says "0.1 sec" it's all in milliseconds.
Alright, this works ok, but it is way to quick! You can't even attack!

What can we do about this problem? Ah! Put in a "delay"!

Code:
SetActiveWindow Knight OnLine Client
ObjVar 10 //Sets the Object Variable to 10
CommandDelay 300 //Sets the Command Delay to 300ms
KeyRate 90 //Set the Key Rate to 90 ms

While 1=1
Keys z // Press the key z
Keys r | 100 //Press the key r after 100 ms
delay 5sec //Wait for 5 seconds before hitting z again...
End
As you can see, I put the delay in seconds. if I didn't put sec, it would have done 5 ms (very very quick).

So there's our first ACTool macro! Of course, this isn't very complex, because it is a beginner's tutorial, but I tried to use as many different functions as possible to give you an idea of them.

Writing a macro in... AutoIt!
AutoIt is a pretty neat macro maker, because it is just so very flexible! I'll go through the same macro as in my ACTool guide, but this time, converted to AutoIt.

This short guide will outline a very simple macro "z,r", so don't expect much from it.
I might post more advanced tutorials in the future...

OK, the first thing we always need to do is make the Knight Online Client window become active (so if it's minimised, it'll load up).
This can be achieved via this command:

Code:
WinActivate ("Knight OnLine Client")
The syntax (usage) for the WinActivate function is:
WinActivate ({Window Title}, {Window Text})

Also, please note that I wrote the window title in its exact case!

Now we move onto our main part of the macro.

Code:
While 1
; Code here...
WEnd
This nifty piece of coding is used to repeat something infinitely (While 1 basically says "While 1=1" but it's just weird in that respect..., anyway, 1 is always going to equal 1 so it's an infinite loop.)

So translated.. this means:
While 1 is equal to 1, which it always is..
Do the following...
Then finish one repeat (WEnd) and begin again until 1 doesn't equal 1 (which will never happen).

The "; Code here..." part is our comment. I'll be putting in lots of comments for the rest of this tutorial.

So seeing as what's inside the While function (can't call it a loop ) is a comment which does absolutely nothing except keeps your code nice and tidy, this won't do anything!

We need to work on the bit inside the While function now...

Code:
While 1
Send ("z") ; Press the key z
Send ("r") ; Press they key r
WEnd
As you can see from my comments, the first bit "Send ("z")" simply presses the button z! In Knight Online of course, this targets a new enemy. How simple is that?!
The same goes for the "Send ("r")" line.

If you wanted to make it "Send" a special character, like for example Enter, you'd need to use:

Code:
Send ("{enter}")

Alright, this works ok, but it is way too quick! You can't even attack!

What can we do about this problem? Ah! Put in a "sleep"!

Code:
WinActivate ("Knight OnLine Client")

While 1
Send ("z") ; Press z
Send ("r") ; Press r
Sleep (5000) ;Wait for 5 seconds before hitting z again...
WEnd
So now we can run it, how do we stop it?! Well... lets change it around a bit to make this work!

Code:
HotKeySet("{enter}","IsOn")
HotKeySet("{Esc}","Terminate")

Global $TogglePause = "UnPaused" ; Declares the variable TogglePause

func IsOn()
If $TogglePause = "UnPaused" Then ;If it is Unpaused
$TogglePause = "Paused" ;Change it to Paused
ToolTip ("Paused...") ;Display a balloon tooltip window displaying its status
Else ;Otherwise...
$TogglePause = "UnPaused" ;The variable is now equal to Unpaused
ToolTip ("Un-paused...") ;Balloon tooltip displays the current status
endif ;ends the if function
EndFunc

Func Terminate() ;Exit script
Tooltip("Exiting...") ;Display Exiting... tooltip
Exit ;Ends the script
EndFunc

WinActivate ("Knight OnLine Client")
While 1
if $TogglePause = "Unpaused" Then ; Only if it's UNPAUSED do the following
Send ("z") ; Press z
Send ("r") ; Press r
Sleep (5000) ;Wait for 5 seconds before hitting z again...
endif ;End the if function
WEnd
So there's our first AutoIt macro! Of course, this isn't very complex, because it is a beginner's tutorial, but I tried to use as many different functions as possible to give you an idea of them.

Hope you liked my guide!

Biri acıklasın lütfen.

E

EagLe Erectus

20 yıl (583 mesaj)

Yüzbaşı

Koxp benzeri bir macro programına benziyor ben pek birşey anlayamadım

B

bigknife

20 yıl (11949 mesaj)

Yüzbaşı

quote:

Orjinalden alıntı: aydinaa

Writing a macro in... ACTool!
This short guide will outline a very simple macro "z,r", so don't expect much from it.
I might post more advanced tutorials in the future...

OK, the first thing we always need to do is make the Knight Online Client window become active (so if it's minimised, it'll load up).
This can be achieved via this command:

Code:
SetActiveWindow Knight OnLine Client
The syntax (usage) for the SetActiveWindow function is:
SetActiveWindow {Window Title}

Also, please note that I wrote the window title in its exact case!

Now that you've done that, set your global hotkeys for starting and stopping the macro (Editor -> Preferences -> Global Hotkeys). I prefer the Esc key.

Now we move onto the speed...
For this, we need ObjVar CommandDelay and KeyRate.
It's recommended to keep these commands the same for macros, but if you ~really~ need to change it, do so.

Now we move onto our main part of the macro.

Code:
While 1=1
// Code here...
End
This nifty piece of coding is used to repeat something infinitely (While 1 is equal to 1, which it always is!)

So translated.. this means:
While 1 is equal to 1, which it always is..
Do the following...
Then finish one repeat (End) and begin again until 1 doesn't equal 1 (which will never happen).

The "// Code here..." part is our comment. I'll be putting in lots of comments for the rest of this tutorial.

So seeing as what's inside the While function (can't call it a loop ) is a comment which does absolutely nothing except keeps your code nice and tidy, this won't do anything!

We need to work on the bit inside the While function now...

Code:
While 1=1
Keys z // Press the key z
Keys r | 100 //Press the key r after 100 ms
End
As you can see from my comments, the first bit "Keys z" simply presses the button z! In Knight Online of course, this targets a new enemy. How simple is that?!
But wait, this function can get a little more advanced (not much ) by having an AUTOMATIC delay between keys!

"Keys r | 100" simply means press r after 100 ms (milliseconds). Unless it says "0.1 sec" it's all in milliseconds.
Alright, this works ok, but it is way to quick! You can't even attack!

What can we do about this problem? Ah! Put in a "delay"!

Code:
SetActiveWindow Knight OnLine Client
ObjVar 10 //Sets the Object Variable to 10
CommandDelay 300 //Sets the Command Delay to 300ms
KeyRate 90 //Set the Key Rate to 90 ms

While 1=1
Keys z // Press the key z
Keys r | 100 //Press the key r after 100 ms
delay 5sec //Wait for 5 seconds before hitting z again...
End
As you can see, I put the delay in seconds. if I didn't put sec, it would have done 5 ms (very very quick).

So there's our first ACTool macro! Of course, this isn't very complex, because it is a beginner's tutorial, but I tried to use as many different functions as possible to give you an idea of them.

Writing a macro in... AutoIt!
AutoIt is a pretty neat macro maker, because it is just so very flexible! I'll go through the same macro as in my ACTool guide, but this time, converted to AutoIt.

This short guide will outline a very simple macro "z,r", so don't expect much from it.
I might post more advanced tutorials in the future...

OK, the first thing we always need to do is make the Knight Online Client window become active (so if it's minimised, it'll load up).
This can be achieved via this command:

Code:
WinActivate ("Knight OnLine Client")
The syntax (usage) for the WinActivate function is:
WinActivate ({Window Title}, {Window Text})

Also, please note that I wrote the window title in its exact case!

Now we move onto our main part of the macro.

Code:
While 1
; Code here...
WEnd
This nifty piece of coding is used to repeat something infinitely (While 1 basically says "While 1=1" but it's just weird in that respect..., anyway, 1 is always going to equal 1 so it's an infinite loop.)

So translated.. this means:
While 1 is equal to 1, which it always is..
Do the following...
Then finish one repeat (WEnd) and begin again until 1 doesn't equal 1 (which will never happen).

The "; Code here..." part is our comment. I'll be putting in lots of comments for the rest of this tutorial.

So seeing as what's inside the While function (can't call it a loop ) is a comment which does absolutely nothing except keeps your code nice and tidy, this won't do anything!

We need to work on the bit inside the While function now...

Code:
While 1
Send ("z") ; Press the key z
Send ("r") ; Press they key r
WEnd
As you can see from my comments, the first bit "Send ("z")" simply presses the button z! In Knight Online of course, this targets a new enemy. How simple is that?!
The same goes for the "Send ("r")" line.

If you wanted to make it "Send" a special character, like for example Enter, you'd need to use:

Code:
Send ("{enter}")

Alright, this works ok, but it is way too quick! You can't even attack!

What can we do about this problem? Ah! Put in a "sleep"!

Code:
WinActivate ("Knight OnLine Client")

While 1
Send ("z") ; Press z
Send ("r") ; Press r
Sleep (5000) ;Wait for 5 seconds before hitting z again...
WEnd
So now we can run it, how do we stop it?! Well... lets change it around a bit to make this work!

Code:
HotKeySet("{enter}","IsOn")
HotKeySet("{Esc}","Terminate")

Global $TogglePause = "UnPaused" ; Declares the variable TogglePause

func IsOn()
If $TogglePause = "UnPaused" Then ;If it is Unpaused
$TogglePause = "Paused" ;Change it to Paused
ToolTip ("Paused...") ;Display a balloon tooltip window displaying its status
Else ;Otherwise...
$TogglePause = "UnPaused" ;The variable is now equal to Unpaused
ToolTip ("Un-paused...") ;Balloon tooltip displays the current status
endif ;ends the if function
EndFunc

Func Terminate() ;Exit script
Tooltip("Exiting...") ;Display Exiting... tooltip
Exit ;Ends the script
EndFunc

WinActivate ("Knight OnLine Client")
While 1
if $TogglePause = "Unpaused" Then ; Only if it's UNPAUSED do the following
Send ("z") ; Press z
Send ("r") ; Press r
Sleep (5000) ;Wait for 5 seconds before hitting z again...
endif ;End the if function
WEnd
So there's our first AutoIt macro! Of course, this isn't very complex, because it is a beginner's tutorial, but I tried to use as many different functions as possible to give you an idea of them.

Hope you liked my guide!

Biri acıklasın lütfen.

kimsenin açıklıycaanı zannetmiyorum ac tool kullanma kılavuzu yada actool oluşturma kılavuzu gibi bişey

Bu mesaja 2 cevap geldi.

M

M®t

20 yıl (4136 mesaj)

Yarbay

oluşturma kılavuzu bence

çünkü code here dio durmadan code leri werio

nerden buldun bunu?

Bu mesaja 2 cevap geldi.

S

sonelMariachi

20 yıl (664 mesaj)

Yüzbaşı

bencede oluşturma kılavuzu tam okumadım ama kod veriyo sürekli. fgnetwork kaynaktır muhtemelen. topici açan arkadaş boşver bunları legal yolla devam oyuna

I

Isbara ALP

20 yıl (16475 mesaj)

Yarbay

hiçbirşey anlamadım oluşturma kılavuzu gibi birşey.
alıntıyı kullanmazsanız sevinirim çok yer kaplıyor.

Bu mesaja 1 cevap geldi.

C

Cenk

20 yıl (6335 mesaj)

Yarbay

İllegal yolllarla ilgili konular forumda yasak zaten.

Burda çe$itli kodlar verilmiş.

Bu mesaja 1 cevap geldi.

A

altunga

20 yıl (332 mesaj)

Yüzbaşı

actoolda macro yapmayı açıklamış z-r macrosunu örnekle açıklamış.

Bu mesaja 1 cevap geldi.

P

PreDLoNa

20 yıl (1033 mesaj)

Yüzbaşı

bu kodları actoolsun ıcıne yapıstırıosnuz ve calsıtırdıgınızda koxp benzerı zr skıll tarsı ve zamana gore wolf evade atan bı macronun kodları

Edit: Actools artık Ko ya Komut Gonderemıo Bu olay Fd den Once wardı Hatta Bazıları Comboları Bole yapıodu

< Bu mesaj bu kişi tarafından değiştirildi PreDLoNa -- 28 Ocak 2007; 12:53:28 >

B

bigknife

20 yıl (11949 mesaj)

Yüzbaşı

kimsenin açıklıycaanı zannetmiyorum ac tool kullanma kılavuzu yada actool oluşturma kılavuzu gibi bişey

edit:alıntıyı kaldırdım

A

Akçalı.

20 yıl (13190 mesaj)

Yarbay

alkollumusun olm ne dion olm sen kafamı iyi

Q

qUIcq

19 yıl (333 mesaj)

Yüzbaşı

bu ne la

Bu mesaja 2 cevap geldi.

S

Sélcuk

19 yıl (2490 mesaj)

Binbaşı

Bir macroyu yazmak... ACTool!
Bu kısa rehber, "Z, r" çok basit bir macronun ana hatlarını çizecek, bundan dolayı ondan çok beklemez.
Ben, gelecekte daha ileri özel dersleri ilan edebilirdim...

Onayla, bizim her zaman, yapmaya ihtiyaç duyduğumuz ilk şeydir, internet üzerinde müşteri penceresinin, aktif olduğu (Öyle, eğer, en aza indirilirse, o, yukarıya yükleyecek) şövalyeyi yapar.
Bu, bu emir yoluyla başarılabilir:

Kod:
SetActiveWindow şövalyesi, SetActiveWindow görevi için sözdiziminin (Kullanım) olduğu internet üzerinde müşteridir:

{Pencere başlığı} hem de SetActiveWindow, lütfen benim, onun tam olayında pencere başlığını yazdığımı not eder!

Senin, ona yaptığın düşünülürse, macroya başlamak ve durdurmak için senin global hotkeysini koydu (-> tercihler> global Hotkeys). Ben, Esc anahtarını tercih ederim. Biz şimdi, hıza hareket ederiz... Bunun için, biz, ObjVar CommandDelay ve KeyRate'ye ihtiyaç duyarız. O, macros için aynen bu emirleri tutmayı tavsiye etti, ama eğer really need to change it, do so sense. Biz şimdi, bizim macro ana parçamıza hareket ederiz. Kod: 1=1, burayı kodlarken... Son alaya almanın bu güzel parçası, sınırsızca (1, onun her zaman olduğu 1'e eşit olurken!) öyle, çevirilen bir şeyi tekrarlamak için kullanılır.. Bu, ifade eder: 1, onun her zaman olduğu 1'e eşit olurken.. Takip edene yap... Sonra birinin, (Son) tekrarladığı ve yeniden başladığını bitir, 1, 1 eşit olmayıncaya kadar (Asla hangisi olmayacak). "Burayı kodla..." parçası, bizim yorumumuzdur. Ben, bu özel dersin kalanı için bir sürü yorumları içeride koyuyor olacağım. Öyle, mademki neyin içindedir, görev (Onu bir ilmik olarak çağırama), kendisi hariç kesinlikle hiçbir şey, senin kodunu güzel ve düzenli tutmayan bir yorum olurken, bu, herhangi bir şeyi yapmayacak! Biz, parçada içinde çalışmaya ihtiyaç duyarız şimdi görev olurken... Kod: 1=1 anahtar olurken, z, 100 r in, anahtar r'e bastırdığı anahtar z anahtarlarına bastırır, 100 Bayan son sen olarak, benim yorumlarımdan görebildikten sonra, ilk parça "Anahtarlar, z'dir" basitçe, düğmeye z'i bastırır! Tabii şövalyede internet üzerinde, bu, yeni bir düşmanı hedefler. O, ne kadar basittir?! Ama bekle, bu görev, otomatik bir gecikmeye geçerek sahip olması için biraz daha çok ileri (Büyük kısım değil)i alabilir editör.
Anca bu kadar çevirdim