Bootable USb hazirlama yazisi türkcelestirme calismasi:
Here is a mini simple guide: what i do to make my '4gb Kingston USB flash stick' bootable with jaclaz post #2 tutorial. WARNING: If you install acronis diskdirector, it is reported that snapman.sys installed with acronis diskdirector prevents access to disk mbr, so before using this guide or tutorials at post #1 / #2 (or maybe any other disk utility) first uninstall diskdirector. 1) i extract "MBRBatch_x64_&_x86_Compatible.rar" to D:\ (it can be C:\ , E:\ ...., i will use D:\ as an example) , for this mini guide D:\ should be ntfs, if fat32 look jacklazz post #2 ** Only Vista users: Ask a xp user friend for dmadmin.exe file, or obtain it from a service pack of xp or 2k3, and put dmadmin.exe to D:\MBRBatch * Optional1: Create a folder C:\MBRBatch\BootFiles and put NTDETECT.COM , NTLDR , boot.ini in it (If you have boot problems use Option1) * Optional2: Create a folder C:\MBRBatch\BootFiles and put grldr , MENU.LST in it (if you want to use grub use Option2 , grldr from grub4dos) * Optional3: Create a folder C:\MBRBatch\ExtraFiles and put files you want to add to usb stick (maybe PE, maybe sth other) ps: "Optional-->You dont have to, left to one's choice, not compulsory, voluntary, discretionary" In this guide i use Option1 and 2 2) I double click BeeblebroxNT.exe , by looking at "Size in Megabytes" I found out that disk drive number of my flash stick is 4 http://img519.imageshack.us/img519/9374/snap1buu6.png 3) I open command prompt and wrote:
http://img521.imageshack.us/img521/8853/snap3eg4.png Here warning says "NOW it would be the perfect time to stop if you are not sure about what you are doing." means The created virtual disk image (yUSB.img) is mounted to I: and I: will be formatted (drive letter I: will change due to your disk settings), If you dont have a mounted "letter" before this operation and you are sure this "letter" created now, than press a key to continue http://img122.imageshack.us/img122/7137/snap4yu4.png last warning before format, press Y if you are sure 5) Now image mounted and an explorer window opened, so if you want you can put extra files in it. http://img122.imageshack.us/img122/3313/snap5rf7.png as i use option1 and option2, i have 5 files here. If you dont use option1 and option2, you wont have anyfiles. If you dont use option1, than at least (must) copy NTDETECT.COM , NTLDR , boot.ini. After putting extra files, press a key on command window, you will get a screen look like this http://img122.imageshack.us/img122/2048/snap6nx8.png 6) Now all you have to do is to copy the image to the USB stick by using this command
dsfi \\.\PHYSICALDRIVE4 0 0 yUSB.img
and wait for a while than you will see this screen http://img387.imageshack.us/img387/617/snap7bt4.png 7) now close command window, safely remove usb stick, and plug in usb stick. At this stage Everything worked nice for me
If the stick does not boot this way, you can try using the mbrbatch to apply the int13 patch that the HP USB formatting utility uses. Look end of post #2 of jaclaz.
degistir dügmesi olmadigindan bir onceki mesajimi dikkate almayin, once ingilizce yazip sonra tr ye degistire degistire cevirecektim. Ama görünen o ki bu baslik altinda degistir dugmesi yok.
Teknoloji Haberleri
< Bu mesaj bu kişi tarafından değiştirildi Iron Sky -- 20 Eylül 2008; 21:53:30 >
Bu mesaja 1 cevap geldi. Cevapları Gizle
araba güzelmis varol53
Bu mesaja 1 cevap geldi. Cevapları Gizle
Bu mesaja 1 cevap geldi. Cevapları Gizle
merak eden arkadaşlar, iste bunun icin actim konuyu
< Resime gitmek için tıklayın >
Bu mesaja 1 cevap geldi. Cevapları Gizle
Here is a mini simple guide: what i do to make my '4gb Kingston USB flash stick' bootable with jaclaz post #2 tutorial.
WARNING: If you install acronis diskdirector, it is reported that snapman.sys installed with acronis diskdirector prevents access to disk mbr, so before using this guide or tutorials at post #1 / #2 (or maybe any other disk utility) first uninstall diskdirector.
1)
i extract "MBRBatch_x64_&_x86_Compatible.rar" to D:\ (it can be C:\ , E:\ ...., i will use D:\ as an example) , for this mini guide D:\ should be ntfs, if fat32 look jacklazz post #2
** Only Vista users: Ask a xp user friend for dmadmin.exe file, or obtain it from a service pack of xp or 2k3, and put dmadmin.exe to D:\MBRBatch
* Optional1: Create a folder C:\MBRBatch\BootFiles and put NTDETECT.COM , NTLDR , boot.ini in it (If you have boot problems use Option1)
* Optional2: Create a folder C:\MBRBatch\BootFiles and put grldr , MENU.LST in it (if you want to use grub use Option2 , grldr from grub4dos)
* Optional3: Create a folder C:\MBRBatch\ExtraFiles and put files you want to add to usb stick (maybe PE, maybe sth other)
ps: "Optional-->You dont have to, left to one's choice, not compulsory, voluntary, discretionary"
In this guide i use Option1 and 2
2)
I double click BeeblebroxNT.exe , by looking at "Size in Megabytes" I found out that disk drive number of my flash stick is 4
http://img519.imageshack.us/img519/9374/snap1buu6.png
3)
I open command prompt and wrote:
and result is:http://img374.imageshack.us/img374/6134/snap2qf1.png
so here is what i need: 4127195136
4)
I wrote this lines to command prompt
http://img521.imageshack.us/img521/8853/snap3eg4.png
Here warning says "NOW it would be the perfect time to stop if you are not sure about what you are doing." means The created virtual disk image (yUSB.img) is mounted to I: and I: will be formatted (drive letter I: will change due to your disk settings), If you dont have a mounted "letter" before this operation and you are sure this "letter" created now, than press a key to continue
http://img122.imageshack.us/img122/7137/snap4yu4.png
last warning before format, press Y if you are sure
5)
Now image mounted and an explorer window opened, so if you want you can put extra files in it.
http://img122.imageshack.us/img122/3313/snap5rf7.png
as i use option1 and option2, i have 5 files here. If you dont use option1 and option2, you wont have anyfiles.
If you dont use option1, than at least (must) copy NTDETECT.COM , NTLDR , boot.ini.
After putting extra files, press a key on command window, you will get a screen look like this
http://img122.imageshack.us/img122/2048/snap6nx8.png
6)
Now all you have to do is to copy the image to the USB stick by using this command
and wait for a while than you will see this screen
http://img387.imageshack.us/img387/617/snap7bt4.png
7)
now close command window, safely remove usb stick, and plug in usb stick.
At this stage Everything worked nice for me
If the stick does not boot this way, you can try using the mbrbatch to apply the int13 patch that the HP USB formatting utility uses. Look end of post #2 of jaclaz.
Bu mesaja 1 cevap geldi. Cevapları Gizle
dügmesi olmadigindan bir onceki mesajimi dikkate almayin, once ingilizce yazip sonra tr ye degistire degistire cevirecektim. Ama görünen o ki bu baslik altinda degistir dugmesi yok.
Bu mesaja 1 cevap geldi. Cevapları Gizle