http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

File sharing --> user management

http://MyBookIPAdresi/auth/firmware_upgrade.pl?fwserver=martin.hinner.info/mybook/firmware.php

# su 
  # cd etc 
  # vi inittab

::sysinit:/usr/sbin/sshd

http://www.belgeler.org/uygulamalar/vi-tutorial/vi-kilavuzu.html

# su  
  # cd /etc/init.d  
  # mv mionet.sh mionet.sh.bak  
  # reboot 

http://pkgconfig.freedesktop.org/releases/pkg-config-0.22.tar.gz 
 http://www.openssl.org/source/openssl-0.9.8e.tar.gz 
 http://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.6.tar.gz 
 http://ftp.gnome.org/pub/GNOME/sources/libsigc++/2.0/libsigc++-2.0.17.tar.gz 
 http://curl.haxx.se/download/curl-7.16.4.tar.gz 
 http://libtorrent.rakshasa.no/downloads/libtorrent-0.11.7.tar.gz 
 http://libtorrent.rakshasa.no/downloads/rtorrent-0.7.7.tar.gz 
 http://jaist.dl.sourceforge.net/sourceforge/dtach/dtach-0.7.tar.gz

cp shares/internal/PUBLIC/rtorrent/* /opt/

# cd /opt/ 
  # tar -zxvf pkg-config-0.22.tar.gz 
  # cd pkg-config-0.22 
  # ./configure 
  # make 
  # make install

# cd .. 
  # tar -zxvf openssl-0.9.8e.tar.gz 
  # cd openssl-0.9.8e 
  # ./Configure gcc 
  # make 
  # make install

# cd .. 
  # tar -zxvf ncurses-5.6.tar.gz 
  # cd ncurses-5.6.tar.gz 
  # ./configure 
  # make 
  # make install

# cd .. 
  # tar -zxvf libsigc++-2.0.17.tar.gz 
  # cd libsigc++-2.0.17.tar.gz 
  # ./configure 
  # make 
  # make install

# cd .. 
  # tar -zxvf curl-7.16.4.tar.gz 
  # cd curl-7.16.4.tar.gz 
  # ./configure 
  # make 
  # make install

export PKG_CONFIG_PATH=/usr/local/ssl/lib/pkgconfig/

# cd .. 
  # tar -zxvf libtorrent-0.11.7.tar.gz 
  # cd libtorrent-0.11.7 
  # ./configure 
  # make 
  # make install

# cd .. 
  # tar -zxvf rtorrent-0.7.7.tar.gz 
  # cd rtorrent-0.7.7 
  # ./configure 
  # make 
  # make install

rtorrent: can't load library 'libcurl.so.4'

ln -s /usr/local/lib/libcurl.so.4 /lib/ 

rtorrent: can't load library 'libtorrent.so.10'

ln -s /usr/local/lib/libtorrent.so.10 /lib/ 

# cd /opt/ 
  # tar -zxvf dtach-0.7.tar.gz 
  # ./configure 
  # make 
  # cp /opt/dtach-0.7/dtach /bin/

dtach -c /tmp/socket-rtorrent rtorrent

dtach -a /tmp/socket-rtorrent 

# cd /~ 
  # vi .rtorrent.rc

# The settings of torrents will be saved in this directory; 
  # and a file, which will prevent rTorrent running more than once; 
  session = /shares/internal/PUBLIC/Torrents 
  # where the downloaded files will be saved; 
  directory = /shares/internal/PUBLIC/Torrents 
  # Default upload speed (0 means No Limit); 
  upload_rate = 10 
  # Default download speed (0 means No Limit); 
  download_rate = 0 
  # if rTorrent should use UDP; 
  use_udp_trackers = yes 
  # Max. number of upload slots per torrent; 
  # max_uploads = 20 
  # Port range from where rTorrent will try to connect, make sure it’s not blocked by your routers firewall; 
  port_range = 20202-20202 
  # Min. and max. connections to one torrent; 
  # min_peers=10 
  # max_peers=400 
  # Stops uploading when ratio is 1.5 and file size greater than 100MB 
  # or ratio is over 2.0; 
  schedule = ratio,60,60,”stop_on_ratio=150,100M,200″ 
  # Stops downloading when there is less than 50MB diskspace; 
  schedule = low_diskspace,5,60,”close_low_diskspace=50M” 
  # Torrents will be automatically added to the download list from this directory; 
  schedule = watch_directory,5,5,”load_start=/shares/internal/PUBLIC/Torrents/autoload/*.torrent” 
  # After deleting torrents from that list .torrent files will be deleted too; 
  schedule = untied_directory,5,5,”stop_untied=”

 
  #mkdir /tmp/myfiles 
   
  #wgethttp://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.6.tar.gz 
  #tar -zxvf ncurses-5.6.tar.gz 
   
  #cd ncurses-5.6 
   
  #./configure 
  #make 
  #make install 
   
  

  
  #su 
   
  #cd /tmp/myfiles 
   
  #wgethttp://www.nano-editor.org/dist/v2.0/nano-2.0.6.tar.gz 
  #tar -zxvf nano-2.0.6.tar.gz 
   
  #cd nano-2.0.6 
  #./configure 
  #make 
  #make install 
   
  

 
  #su 
  #ln -s /shares/internal/PUBLIC /usr/www/lib/ 
  #cd /etc/lighttpd 
  #cp lighttpd.conf lighttpd.backup 
  #nano lighttpd.conf 
  aşağıdaki satırı ekleyin bu sayede klasör görünümü etkin hale gelicek 
  dir-listing.activate = "enable" 
  #reboot 
  

 
  #su 
  #cd /tmp/myfiles 
  #wgethttp://ftp.gnome.org/pub/gnome/sources/libxml2/2.6/libxml2-2.6.30.tar.gz 
  #tar -zxvf libxml2-2.6.30.tar.gz 
  #cd libxml2-2.6.30 
  #./configure 
  #make 
  #make install 
  #cp /usr/local/lib/libxml2.so.2 /lib 
  

 
  #su 
  #cd /tmp/myfiles 
  #wgethttp://tr.php.net/distributions/php-5.2.4.tar.gz 
  #tar -zxvf php-5.2.4.tar.gz 
  #cd php-5.2.4 
  #./configure -–without-iconv -–without-pear -–enable-fastcgi -–enable-discard-path -–enable-force-cgi-redirect  
  #make 
  #make test 
  #make install 
  

 
  #su 
  #cd /etc/lighttpd 
  #nano lighttpd.conf 
  

 
  “nasMaster.pl” => (( “socket” => “/tmp/lighttpd.fcgi.socket”,  
                        “check-local” => “disable”, 
   )) 
   ) 
  

 
   “nasMaster.pl” => (( “socket” => “/tmp/lighttpd.fcgi.socket”,  
                        “check-local” => “disable”, 
   )), 
   “.php” => ((  “bin-path” => “/usr/local/bin/php-cgi”,  
                “socket” => “/tmp/php.socket”, 
   )) 
  ) 
  

index-file.names = ( "nasMaster.pl" )

index-file.names = ( "nasMaster.pl", "index.html", "index.php" )

#reboot

 <?php phpinfo(); ?> 

 
  #su 
  #cd /tmp/myfiles 
  #wgethttp://ftp.gnu.org/gnu/m4/m4-1.4.10.tar.gz 
  #wgethttp://ftp.gnu.org/gnu/autoconf/autoconf-2.61.tar.gz 
  #wgethttp://ftp.gnu.org/gnu/automake/automake-1.9.6.tar.gz 
  

 
  #su 
  #cd /tmp/myfiles 
  #tar -zxvf m4-1.4.10.tar.gz 
  #cd m4-1.4.10 
  #./configure 
  #make 
  #make install 
   
  #su 
  #cd /tmp/myfiles 
  #tar -zxvf autoconf-2.61.tar.gz 
  #cd autoconf-2.61 
  #./configure 
  #make 
  #make install 
   
  #su 
  #cd /tmp/myfiles 
  #tar -zxvf automake-1.9.6.tar.gz 
  #cd automake-1.9.6 
  #./configure 
  #make 
  #make install 
  

 
  #su 
  #mkdir /shares/internal/PUBLIC/w3btorrent 
  #cd /shares/internal/PUBLIC/w3btorrent 
  #wgethttp://www.thewulong.com/w3btorrent/install.php 
  

http::/<MyBookIP>/PUBLIC/w3btorrent/install.php

http::/<MyBookIP>/PUBLIC/w3btorrent/