MSI Eclipse SLI X58 anakartta rem problemi MSI Eclipse SLI X58 anakart aldım 6GB DDR3 HyperX 1600Mhz CL8 (3*2GB)XMP marka rem aldım ve bu remleri sadece 2-3-4 nolu slotlarda ( siyah-mavi-siyah) kulanabiliyorum. yabancı bir siteden araştırdım ama 2-4-6 slotlara takıpğ aşağıdaki ayarları yapın diyor çözemedim linki veriyorum bu konuda yardımlarınızı bekiyorum teşekkürler. http://forum.corsair.com/v3/showthread.php?t=76327 Insert your Memory in slots 2, 4 and 6. These are from the CPU. So, not in the first slot. Bypass the first slot and insert into the second, fourth and sixth slots. Restart the system and enter the BIOS. Set to these values: Code: Advanced BIOS Features
Cell Menu
->CPU Specifications <Enter> Report on CPU Spec (No Entries Possible)
Intel EIST = Enabled Intel C-State Tech = Enabled C State package Limit Setting = Auto C1 Auto Demotion = Enabled C3 Auto Demotion = Enabled Base Clock (Mhz) = 133 Intel Turbo Boost Tech = Enabled -> Turbo Boost Tech Config <Enter> Leave all as Set
QPI Configuration <Enter> QPI Link Speed = Full Speed QPI Frequency = 6.400GT
Memory-Z <Enter> X.M.P Support Information = DDR3-1333
Advance Dram Configuration <Enter> 1N/2N Memory Timing = Auto CAS Latency(CL) = 9 tRCD = 9 tRP = 9 tRAS = 24 Advanced Memory Setting = Manual tRFC = 80 All Else to Auto
Extreme Memory Profile = Disabled Memory Ratio = 5 Adjusted DRAM Frequency = 1333Mhz
DRAM Voltage = 1.65vBoot to the Memtest CD and allow for two full passes. If stable, enter Windows and post screenshots of CPU-z's CPU, Memory and SPD tabs.
Mesaj linki kopyalandı.
İşlem başarılı.
Bir sorun oluştu.
DH Mobil uygulaması ile devam edin.
Mobil tarayıcınız ile mümkün olanların yanı sıra, birçok yeni ve faydalı özelliğe erişin.
MSI Eclipse SLI X58 anakart aldım 6GB DDR3 HyperX 1600Mhz CL8 (3*2GB)XMP marka rem aldım ve bu remleri
sadece 2-3-4 nolu slotlarda ( siyah-mavi-siyah) kulanabiliyorum. yabancı bir siteden araştırdım ama 2-4-6 slotlara takıpğ aşağıdaki ayarları yapın diyor çözemedim linki veriyorum bu konuda yardımlarınızı bekiyorum teşekkürler.
http://forum.corsair.com/v3/showthread.php?t=76327
Insert your Memory in slots 2, 4 and 6. These are from the CPU. So, not in the first slot. Bypass the first slot and insert into the second, fourth and sixth slots. Restart the system and enter the BIOS. Set to these values:
Code:
Advanced BIOS Features
Cell Menu
->CPU Specifications <Enter>
Report on CPU Spec (No Entries Possible)
Intel EIST = Enabled
Intel C-State Tech = Enabled
C State package Limit Setting = Auto
C1 Auto Demotion = Enabled
C3 Auto Demotion = Enabled
Base Clock (Mhz) = 133
Intel Turbo Boost Tech = Enabled
-> Turbo Boost Tech Config <Enter>
Leave all as Set
QPI Configuration <Enter>
QPI Link Speed = Full Speed
QPI Frequency = 6.400GT
Memory-Z <Enter>
X.M.P Support Information = DDR3-1333
Advance Dram Configuration <Enter>
1N/2N Memory Timing = Auto
CAS Latency(CL) = 9
tRCD = 9
tRP = 9
tRAS = 24
Advanced Memory Setting = Manual
tRFC = 80
All Else to Auto
Extreme Memory Profile = Disabled
Memory Ratio = 5
Adjusted DRAM Frequency = 1333Mhz
DRAM Voltage = 1.65vBoot to the Memtest CD and allow for two full passes. If stable, enter Windows and post screenshots of CPU-z's CPU, Memory and SPD tabs.