Profil: ardaakdag55

A

ardaakdag55
Elektronik altına konu açtı.

2 ay

#include <Servo.h>
Servo motor;
int pot = A0;

void setup() {
motor.attach(5);
pinMode(pot, INPUT);
}
void loop() {
int potokunan = analogRead(pot);
int aci = map(potokunan, 0, 1023, 0, 180);
motor.write(aci);
delay(10);
}

A

ardaakdag55
Elektronik altına konu açtı.

2 ay

PIR SENSÖR

int sensor = 8;
int led = 9;

void setup()
{
pinMode(sensor, OUTPUT);
pinMode(led, INPUT);
}

void loop()
{
if(digitalRead(sensor)== HIGH)
digitalWrite(led, HIGH);
else
digitalWrite(led,LOW);
}

A

ardaakdag55
Elektronik altına konu açtı.

2 ay

park sensörü

const int trigger_pin = 12;
const int echo_pin = 13;
const int buzzer = 2;
const int mled = 3;
const int yled = 4;
const int sled = 5;
const int kled = 6;

int sure;
int mesafe;

void setup() {
pinMode(kled, OUTPUT);
pinMode(sled, OUTPUT);
pinMode(yled, OUTPUT);
pinMode(buzzer, OUTPUT);
pinMode(trigger_pin, OUTPUT);
pinMode(echo_pin, INPUT);
Serial.begin(9600);
}

void loop()
{ digitalWrite(trigger_pin, HIGH);
delayMicroseconds(1000);
digitalWrite(trigger_pin, LOW);
sure = pulseIn(echo_pin, HIGH);
mesafe = (sure / 2) / 28.5;

if (mesafe <= 10)
{
digitalWrite(kled, HIGH);
digitalWrite(buzzer, HIGH);
delay(50);
digitalWrite(kled, LOW);
digitalWrite(buzzer, LOW);
delay(250);
}

else if (mesafe <= 25)
{
digitalWrite(sled, HIGH);
digitalWrite(buzzer, HIGH);
delay(50);
digitalWrite(sled, LOW);
digitalWrite(buzzer, LOW);
delay(500);
}

else if (mesafe <= 50)
{
digitalWrite(yled, HIGH);
digitalWrite(buzzer, HIGH);
delay(50);
digitalWrite(yled, LOW);
digitalWrite(buzzer, LOW);
delay(750);
}

else
{
digitalWrite(mled, HIGH);
delay(1000);
digitalWrite(mled, LOW);
delay(1000);
}

}

A

ardaakdag55
Diğer Hobiler altına konu açtı.

2 ay

pot ile servo

int potPin = A0;
Servo servoM;
int pos = 0;
void setup()
{
servoM.attach(9);
}
void loop()
{
pos = analogRead(potPin);
pos = map(pos, 0 , 1023 , 0, 180);
servoM.write(pos);
delay(15);
}