Usb için linux indirin. YAZILIM MERKEzinden ghexi indirin Terminali açıp SUDO SU
YAZIP ENTERLEYIN Ghex Yazıp enterleyın. Oradan sys firmware efivars system04 ile başlayan dosyayı açıp Vıdeodakı gıbı 0x201dı sanırsam o satır
First find connection icon in lower right of screen and connect to network (needed to download ghex editor) 4.Access UEFI via a console/terminal (A BLACK BOX WITH THIS SYMBOL IN IT >_ ) LOCATED BOTTOM LEFT...THIRD ICON FROM MENU.. 5. Type in terminal (enter after every line) sudo su modprobe efivars apt-get install ghex ghex
6. Now ghex editor is running in super user state...be careful and if you don't know what your doing...im not responsible..find someone who does.. UNDER FILE TAB OPEN NAVIGATE TO File System/sys/firmware/efi/efivars/Setup-a04a............. (Setup-a04a............ I LEFT THE FULL NAME OFF BUT YOU'LL KNOW WHAT FILE IT IS WHEN YOU SCROLL DOWN) edit 0X21b and 0X21c change the 00 to 01 for both
7. exit ghex it will ask you to save....must save.. 8. close all windows 9. HOLD POWER BUTTON UNTIL UNIT SHUTS DOWN...MUST... 10. UNPLUG USB CD DRIVE OR REMOVE DISK 11.START UP...PRESS F2 TO ENTER BIOS AND YOU'LL SEE ADVANCED MENUS.. 12. BE CAREFUL AND USE AT OWN RISK...RESTORING DEFAULT SETTINGS WILL PROBABLY REMOVE ADVANCED MENUS FROM BIOS... THANKS AND ENJOY
< Bu mesaj bu kişi tarafından değiştirildi Yossi Kohler -- 30 Kasım 2014; 23:08:01 >
http://m.youtube.com/watch?v=kDLTEZrRqsg
http://m.youtube.com/watch?v=fzuuE0tz6bY
Usb için linux indirin.
YAZILIM MERKEzinden ghexi indirin
Terminali açıp
SUDO SU
YAZIP ENTERLEYIN
Ghex
Yazıp enterleyın.
Oradan sys firmware efivars system04 ile başlayan dosyayı açıp
Vıdeodakı gıbı 0x201dı sanırsam o satır
First find connection icon in lower right of screen and connect to network
(needed to download ghex editor)
4.Access UEFI via a console/terminal
(A BLACK BOX WITH THIS SYMBOL IN IT >_ )
LOCATED BOTTOM LEFT...THIRD ICON FROM MENU..
5. Type in terminal (enter after every line)
sudo su
modprobe efivars
apt-get install ghex
ghex
6. Now ghex editor is running in super user state...be careful and if you don't know what your doing...im not responsible..find someone who does..
UNDER FILE TAB OPEN
NAVIGATE TO File System/sys/firmware/efi/efivars/Setup-a04a.............
(Setup-a04a............ I LEFT THE FULL NAME OFF BUT YOU'LL KNOW WHAT FILE IT IS WHEN YOU SCROLL DOWN)
edit 0X21b and 0X21c
change the 00 to 01 for both
00000210 00 00 00 00 01 00 00 00 00 00 00 01 01 00 00 00
7. exit ghex it will ask you to save....must save..
8. close all windows
9. HOLD POWER BUTTON UNTIL UNIT SHUTS DOWN...MUST...
10. UNPLUG USB CD DRIVE OR REMOVE DISK
11.START UP...PRESS F2 TO ENTER BIOS AND YOU'LL SEE ADVANCED MENUS..
12. BE CAREFUL AND USE AT OWN RISK...RESTORING DEFAULT SETTINGS WILL PROBABLY REMOVE ADVANCED MENUS FROM BIOS...
THANKS AND ENJOY
< Bu mesaj bu kişi tarafından değiştirildi Yossi Kohler -- 30 Kasım 2014; 23:08:01 >
< Bu ileti mobil sürüm kullanılarak atıldı >