Bu konudaki kullanıcılar: 2 misafir, 2 mobil kullanıcı
0
Cevap
32
Tıklama
0
Öne Çıkarma
SEDNA PCI-E SSD SATA 6G ADAPTER KURULUMU

O OSINOS Konu Sahibi
4 yıl (372 mesaj)
Herkese iyi akşamlar..

Geçenlerde şöyle bir adaptör aldım ;

< Resime gitmek için tıklayın >

Ürünün içinden adaptör , yazılım cdsi ve bir not çıktı.. Not olarak ; bunu bilgisayara takınca power konnektöründen güç bağlantısını yapın yazıyor.. yazılım olarak da Asmedia 106x driver kullanıyor.. ( sanırım driverın güncel bir versiyonu var. cddeki versiyon eski ).

Sorun 1 ; Cihazın yazılımını kurmama ve güç bağlantısını yapmama rağmen ( birde ayrıca sata kablo girişi var , oradan bağlantı yapmadım ) cihaz halen görünmüyor.
Soru 1 ; Güç bağlantısı yapınca bu kartın ne anlamı kalıyor o kısmı anlamadım ?
Sorun 2 ; Driver cd si içinden kurulum notu çıkıyor ama , kurmama rağmen henüz bir sonuç alamadım.


Kurulum için şöyle bir metin var , ingilizcesi olan arkadaşlar bir göz atıp yardımcı olabilirse sevinirim. ( İLGİLENEN ARKADAŞLARA ŞİMDİDEN TEŞEKKÜRLER. )

************************************************************
* 4. DETERMINING THE SYSTEM MODE
************************************************************

To use this readme effectively, you will need to know what
mode your system is in. The easiest way to determine the
mode is to identify how the Serial ATA controller is
presented within the Device Manager. The following
procedure will guide you through determining the mode.

1. On the Start menu, select Control Panel.

2. Open on the 'System' applet (you may first
have to select 'Switch to Classic View').

3. Select the 'Hardware' tab.

4. Select the 'Device Manager' button.

5. From the Device Manager, look for an entry named
'SCSI/RAID Controllers'.
If this entry is present, expand it and look for one of
the following controllers:

- 'Asmedia 106x SATA Controller'
If the Controller above is present, no further action
is required.

- If neither of the controllers above are shown, then
the system is not running in RAID mode and you should
continue with step 6 below.

6. From the Device Manager, look for an entry named
'IDE ATA/ATAPI controllers'.
If this entry is present, expand it and look for one of
the following controllers:

- 'Asmedia 106x SATA Controller'
If the Controller above is present, no further action
is required.

- If this controller is not present, then your system
is not in AHCI mode. No other modes are supported by
the Asmedia 106x SATA Host Controller Drive software and you
should continue with step 7 below.

7. Your system does not appear to be running in RAID or
AHCI mode. If you feel that your system is running in
RAID or AHCI mode and you do not see any of the
controllers listed above, you may choose to contact
your system manufacturer or place of purchase for
assistance.


************************************************************
* 5. INSTALLING THE SOFTWARE
************************************************************

5.1 General Installation Notes

1. If you are installing the operating system on a system
configured for RAID or AHCI mode, you must pre-install
the Asmedia 106x SATA Host Controller Drive driver using the
F6 installation method described in section 5.3;

If you are installing this driver on a system configured
for IDE mode, you need do the following steps to finish
the installing:

a) double-click on the self-extracting and self-installing
setup file and answer all prompts presented

b) enter the following path:

<bootdriver>\Program Files\ASM106xSATA\Driver

you can find a directory named "PREPARE", open it

c) double-click the script "install.cmd"

d) reboot system, and switch to AHCI mode, operating system
will automatic installed this drivr.

2. To install the Asmedia 106x SATA Host Controller Drive,
double-click on the self-extracting and self-installing
setup file and answer all prompts presented.

3. By default, all installed files (.inf, .sys, .cat)
are copied to the following path:

<bootdrive>\Program Files\ASM106xSATA\Driver

Note: after install complete, you need doing follow steps
to keep it work on WIN7 x64 Edition or Win Server 2008
x64 Edition:

3.1 reboot the system

3.2 press F8 on bootup menu

3.3 select "Disable Driver Signature Enforcement",
enter ENTER and go on

5.2 InstallShield* Installation from Hard Drive or CD-ROM

Note: This method is applicable to systems configured for
RAID or AHCI mode.

1. Download the Asmedia 106x SATA Host Controller Drive setup file
(Setup.exe)and double-click to self-extract and to begin
the setup process.

2. The 'Choose Language' window appears. Choose the language
and Click on the Next button to continue.

3. If the InstallShield* Wizard Complete window is shown
without a prompt to restart the system, click the Finish
button and proceed to step 4. If it is shown with a
prompt to restart the system, click 'Yes, I want to
restart my computer now.' (the default selection) and
click the Finish button. Once the system has restarted,
proceed to step 4.

4. To verify that the driver was loaded correctly, refer
to Section 6.

5.3 Pre-Installation Using the F6 Method.

Note: These methods are applicable to systems configured for
RAID or AHCI mode.

1. Extract all driver files from the installation package.
See section 7.2 for instructions on extracting the
files.

2. Create a floppy* containing the following files in the root
directory:
for XP, Server2003:
asahxp32.inf, asahxp32.cat, asahxp32.sys, txtSetup.oem

for XP x64 edition, Server2003 x64 edition:
asahxp64.inf, asahxp64.cat, asahxp64.sys, txtSetup.oem

for Vista, Server2008, Win7, Win8 :
asahci32.inf, asahci32.cat, asahci32.sys

for Vista x64 edition, Server2008 x64 edition, Win7 x64 edition, Win8 x64 edition:
asahci64.inf, asahci64.cat, asahci64.sys

*Note: For Windows Vista you can use Floppy, CD/DVD or USB.

3. For Windows XP or later operating systems:

-At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.

-When prompted, select 'S' to Specify Additional Device.

-continue to step 5.

4. For Windows Vista:

-During the Operating system installation, after selecting the
location to install Vista click on "load Driver" button to
install a third party SCSI or RAID driver.

-Continue to step 5.

5. When prompted, insert the floppy disk or media (Floppy, CD/DVD
or USB) you created in step 2 and press Enter.

6. At this point you should be presented with a selection
for one of the following depending on your hardware
version and configuration:

- Asmedia 106x SATA Controller


7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.

8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.

************************************************************
* 6. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************

6.1 Verifying Hard Disk, F6, or Unattended Installation:
depending on your system configuration, refer to the
appropriate sub-topic below:

Note: Systems must Configured for AHCI Mode:

1. On the Start menu, select 'Control Panel'

2. Open on the 'System' applet (you may first
have to select 'Switch to Classic View')

3. Select the 'Hardware' tab

4. Select the 'Device Manager' button.

5. For Vista, Server 2008, Win7, Win8
Expand the 'IDE ATA/ATAPI Controllers' entry

For XP, Server 2003
Expand teh 'SCSI/RAID Controllers' entry

6. Right-click on 'ASMedia 106x SATA Controller'

7. Select 'Properties'

8. Select the 'Driver' tab

9. Select the 'Driver Details' button

10. follow file shoud displayed, then installation was
successful:

-'asahxp32.sys' for XP, Server2003
-'asahxp64.sys' for XP x64 edition, Server2003 x64 edition
-'asahci32.sys' for Vista, Server2008, Win7, Win8
-'asahci64.sys' for Vista x64 edition, Server2008 x64 edition, Win7 x64 edition, Win8 x64 edition



DH Mobil uygulaması ile devam edin. Mobil tarayıcınız ile mümkün olanların yanı sıra, birçok yeni ve faydalı özelliğe erişin. Gizle ve güncelleme çıkana kadar tekrar gösterme.