CUDA veya OpenCL hakkında bilgi sahibi degilim. ekran kartı ilk yaptıgımda 1 gb standard ekran kartıydı. fakat randıman alamadığım icin arkadasımın cıkma NVIDIA Quadro FX 580 (512 MB) kartını kullanmaya basladim. cizimin boyutu yukselince ve de makina yaslanınca ilk zamanlardaki gibi hızlı calismiyor. eski makinamdaki sorunlarim.. islem yaparken siyah ekran olup flashlaması... Open Gl ile program calisiyor.. bu sisteme Ssd HDD takviyesi de yaptım ( samsung evo 840 120gb)
************************** yeni makina kuracagim. eski makina evde calismak icin. yeni toplayacagim iste kullanmak icin olacak.
bana yardımcı olabilecek konf. verebilirseniz cok memnun olurum.. simdiden tesekkurler...
Halen kullandığım makinamın ozellikleri ( yıl 2008 )...
DirectX 11.0 x64-based Win7 Ultimate
QuadCore intel Core i7-930 Bloomfield, 2966 MHz (22 x 135) Gigabyte GA-EX58-UD5 (Intel Tylersburg X58, Intel Nehalem) Corsair XMs3 CM3X2G1600C9 3 x 2 GB DDR3-1333 DDR3 NVIDIA Quadro FX 580 (512 MB) samsung SyncMaster B2430H/B2430HF (Digital) [24" LCD] (H9XZ201652) ST3500418AS ATA Device (500 GB, 7200 RPM, SATA-II) logitech HID-compliant G3/MX518 Optical Mouse real 650 w gigabyte case
+++++++++++++++++++++++++
crea ve topsolid programı kullanıyorum.crea program istekleri
Graphics Information
For 3D-hardware acceleration, an OpenGL graphics card must be used that has been tested in a PTC-
certified configuration. To ensure the compatibility of a graphics driver with Creo 3.0, a PTC
certified or supported hardware configuration is recommended. Graphics cards that support at least
OpenGL 4.0 are recommended for Creo 3.0. PTC recognizes that customers can benefit from using latest graphics driver and performance
optimizations and improvements made by PTC’s Graphics Hardware Partners. With new workstations being
continuously certified by PTC, the most current graphics drivers used in the certification process
can now be re-applied to previously certified configurations, as long as the configuration belongs to
the same combination of workstation and graphics hardware families.
+++++++++++
System Requirements
Main Memory (RAM) Operating System Recommended amount Windows 7 64-bit ram 4 GB or higher Monitor 1280 x 1024 (or higher) resolution support with 24-bit or greater color
Mesaj linki kopyalandı.
İşlem başarılı.
Bir sorun oluştu.
DH Mobil uygulaması ile devam edin.
Mobil tarayıcınız ile mümkün olanların yanı sıra, birçok yeni ve faydalı özelliğe erişin.
fikir olması acisindan biraz bilgi vereyim..
CUDA veya OpenCL hakkında bilgi sahibi degilim. ekran kartı ilk yaptıgımda 1 gb standard ekran kartıydı. fakat randıman alamadığım icin arkadasımın cıkma
NVIDIA Quadro FX 580 (512 MB) kartını kullanmaya basladim. cizimin boyutu yukselince ve de makina yaslanınca ilk zamanlardaki gibi hızlı calismiyor.
eski makinamdaki sorunlarim.. islem yaparken siyah ekran olup flashlaması... Open Gl ile program calisiyor..
bu sisteme Ssd HDD takviyesi de yaptım ( samsung evo 840 120gb)
**************************
yeni makina kuracagim. eski makina evde calismak icin. yeni toplayacagim iste kullanmak icin olacak.
bana yardımcı olabilecek konf. verebilirseniz cok memnun olurum.. simdiden tesekkurler...
-------------------------------------------------------
Halen kullandığım makinamın ozellikleri ( yıl 2008 )...
DirectX 11.0 x64-based Win7 Ultimate
QuadCore intel Core i7-930 Bloomfield, 2966 MHz (22 x 135)
Gigabyte GA-EX58-UD5 (Intel Tylersburg X58, Intel Nehalem)
Corsair XMs3 CM3X2G1600C9 3 x 2 GB DDR3-1333 DDR3
NVIDIA Quadro FX 580 (512 MB)
samsung SyncMaster B2430H/B2430HF (Digital) [24" LCD] (H9XZ201652)
ST3500418AS ATA Device (500 GB, 7200 RPM, SATA-II)
logitech HID-compliant G3/MX518 Optical Mouse
real 650 w gigabyte case
+++++++++++++++++++++++++
crea ve topsolid programı kullanıyorum.crea program istekleri
Graphics Information
For 3D-hardware acceleration, an OpenGL graphics card must be used that has been tested in a PTC-
certified configuration. To ensure the compatibility of a graphics driver with Creo 3.0, a PTC
certified or supported hardware configuration is recommended. Graphics cards that support at least
OpenGL 4.0 are recommended for Creo 3.0.
PTC recognizes that customers can benefit from using latest graphics driver and performance
optimizations and improvements made by PTC’s Graphics Hardware Partners. With new workstations being
continuously certified by PTC, the most current graphics drivers used in the certification process
can now be re-applied to previously certified configurations, as long as the configuration belongs to
the same combination of workstation and graphics hardware families.
+++++++++++
System Requirements
Main Memory (RAM) Operating System Recommended amount
Windows 7 64-bit
ram 4 GB or higher
Monitor 1280 x 1024 (or higher) resolution support with 24-bit or greater color